components product information connector new 1/6 mb-0140-2 june 2006 jae pmk div. pro p rietar y . co py ri g ht ? 2006 ? no. of contacts :70, 98, 104, 135 (pin side) ? contact resistance: 8m ohm max. (initial) ? dielectric withstanding voltage: ac1000v per minute ? operating temperature: -40 deg. c to +85 deg. c ? rated current: 2.2a for signal, 5.7a for power features mx31 series board to cable connection high density connec tor for automotive general specifications ? 2.2mm terminal pitch for si gnal, 3.2mm terminal for po wer are 4 row t ype compact high density connector. ? hybrid connector with terminals for both signal and power. ? connector insertion force is under 70n and it enables easy mating work. ? socket terminal is a newly developed te rminal with countermeasure for fretting corrosion by slight conflicts. ? pb-free mounting compatible by using heat resistant resin (sps material) ? plating type of terminal: sn plating or au plating high density and non-water pr oof type of mx31 series is developed to meet the demands for compact and lighte r connectors with multi pin counts, due to increase of computerized control in automot ives. pitch of sign al terminal is 2.2mm, and the pitch of power terminal is 3.2mm. compact and 4r ow type and the variation of the number of terminal is from 70po s. to 135pos. (pin header) this connector meets with automotive specs. and the application is for automotive euc (engine, transmission, etc) ? insulation resistance: 100m ohm max. ? mating cycle: 50cycles ? applicable wire: please refer to next page. ? applicable board thickness: t1.6mm rohs compliant
mb-0140-2 2/6 jae pmk div. proprietary. copyright ? 2006 finishes socket housing pbt retainer 30% gf pbt socket connector socket contact pin connector components materials/ finishes pin insulator 30% gf sps locator 30% gf pbt pin contact brass/ sn plating or au platng components materials/ finishes socket contact high conductivity material/ sn plating or au plating crimping tool m31s05k2fa et-mx31a-1 m31s05k4fa, 4qa m31s07k4fb et-mx31b-1 extraction tool 350-mx31b-3b 350-mx31b-2 m31s05k3fa 350-mx31a-3b 350-mx31a-2 m31s07k4fa, 4qa automatic applicator semi-automatic applicator contact part number * 1 to 1.5 * 0.75 to 1 chfus * * m31s05k4qa (au plating for power) * * m31s05k4fa (sn plating for power) * m31s05k3fa (sn plating for power) *(1.25 only) m31s05k2fa (sn plating for power) * m31s07k4fb (sn plating for signal) * * m31s07k4qa (au plating for signal) * * m31s07k4fa (sn plating for signal) 0.35 to 0.75 0.35 to 0.5 0.22 0.85 to 1.25 0.3 to 0.85 0.3 to 0.5 cpex/ chfus avss cavs cavus applicable wire (unit:mm 2 ) part number note: every contact uses different crimping die. however crimping die for 4fa and 4qa is common.
mb-0140-2 3/6 jae pmk div. proprietary. copyright ? 2006 male connector - 26.8 29.0 - 52.5 48.5 60.5 mx31070nfd 70 sub (compatible to mis-mating 24.6 26.8 29.0 24.6 104.7 104.1 112.7 mx31135nqb 135 24.6 26.8 29.0 24.6 104.7 104.1 112.7 mx31135nqa 135 - 26.8 29.0 24.6 78.6 75.8 86.6 mx31104nfa 104 24.6 26.8 29.0 24.6 104.7 104.1 112.7 mx31135nfa 98 - 26.8 29.0 - 52.5 48.5 60.5 mx31070nfc 70 standard (g) (f) (e) (d) c dimensions part number no. of contacts key position note) ?product with 98pos. type is the same as 135pos. type without the one lowest pin terminal row. ?nf * -> all sn plating type nq *-> sn plating and au plating mixture type. (pitch for power) (pitch for signal)
mb-0140-2 4/6 jae pmk div. proprietary. copyright ? 2006 female connector 26.6 28.8 24.4 24.4 26.6 28.8 24.4 24.4 dimensions mx31035sgd 35 mx31035sgc 35 MX31034SGB 34 mx31031sgb 31 sub (compatible to mis-mating mx31035sgb 35 mx31035sga 35 mx31034sga 34 mx31031sga 31 normal part number no. of contacts key postion (pitch for power) (pitch for signal)
mb-0140-2 5/6 jae pmk div. proprietary. copyright ? 2006 socket contact 1. m31s07k4fa, 4qa, 4fb 2 m31s05k2fa, 3fa, 4fa, 4qa
mb-0140-2 6/6 jae pmk div. proprietary. copyright ? 2006 japan aviation electroni cs industry, limited product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2787 fax: +81-3-3780-2946 notice: products shown in this leaflet are made for the applications listed below. however, if the above-mentioned prod ucts are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact jae for further information. recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), av devices, household applications, fa devices, etc. * the specifications in this brochure are subject to change w ithout notice. please contact jae for information. product drawing 35 35 34 31 35 35 34 31 no. of contacts sj037334 sj037333 sj037336 sj037338 sj037332 sj037331 sj037335 sj037337 sj drawing mx31035sgd mx31035sgc MX31034SGB mx31031sgb mx31035sgb mx31035sga mx31034sga mx31031sga socket p/ n sj037330 sj101333 sj037329 sj038843 sj100814 sj100553 sj drawing mx31070nfd 70 sub (compatible to mis-mating mx31135nqb 135 mx31135nqa 135 mx31104nfa 104 mx31135nfa 98 mx31070nfc 70 standard pin header p/n no. of contacts key position sj037465 sj037464 sj037463 sj038295 sj038294 sj037462 sj037461 sj drawing m31s05k4qa (au plating terminal for power) m31s05k4fa (sn plating terminal for power) m31s05k3fa (sn plating terminal for power) m31s05k2fa (sn plating terminal for power) m31s07k4fb (sn plating terminal for signal) m31s07k4qa (au plating terminal for signal) m31s07k4fa (sn plating terminal for signal) socket contact p/ n handling instructions jacs-1726 jahl-1726 specification
|
